Desk considerations

The desks are divided into pure solid wood desks, solid wood desks and wood-based desks.

Pay attention to the following five aspects when purchasing:

1. Surface quality. When buying a desk, look for defects such as scratches, indentation, blistering, degumming, peeling, and glue marks on the surface of the furniture material. Pay attention to whether the wood grain pattern is natural and smooth.

2. Production quality. Whether the edge of the wooden furniture is flat and the angle is very accurate; the decorative parts of the edges and faces should be checked whether the decorative parts are evenly glued, whether the bonding is firm, and whether the trimming is smooth and smooth; the parts side panels, door panels, drawer panels, etc. Whether the end face of the visible parts such as the mouth is sealed; the assembly parts depend on whether the grooves at the drilled holes are delicate and tidy, and whether the connectors are firm after installation; whether the gap between doors and drawers is too large, the general requirement is 1.5 Between mm~2.0mm, whether the door and drawer can be opened, pushed and pulled flexibly, etc.

3. The quality of metal parts and plastic parts. The quality of the metal parts also determines the internal quality of the furniture in the wooden furniture. The metal parts are required to be dexterous, smooth, and well-plated on the surface, free of rust, burrs, etc., and the precision of the mating parts is required to be high. Plastic parts should be beautiful in appearance and bright in color, and the force and elasticity of the parts in use should be strong and not too thin. The open-type connector requires flexible rotation and no frictional sound.

4. Main dimensions. The main dimensions (ie functional dimensions) of furniture are required by national standards. For example, the large wardrobe stipulates that the depth of the space in the wardrobe should be greater than or equal to 530mm, the distance between the upper edge of the clothes stick for hanging long clothes and the upper surface of the bottom plate should be greater than or equal to 1400mm, the height of table furniture is 680mm~760mm, and the middle drawer of the desk The middle clearance height from the lower edge to the ground height should be greater than or equal to 580mm, and the clearance height between bookcase layers should be greater than or equal to 230mm~310mm, etc. If the furniture is smaller than the specified size, it will cause a lot of inconvenience when used and affect the use.

5. Limits of harmful substances in wooden furniture. The harmful substances in furniture are mainly free formaldehyde released from wood-based panels and adhesives, and soluble lead, chromium, cadmium, and mercury in furniture paint films.